Topology
Resistors
Input Resistor (Rin)10 kΩ
Feedback Resistor (Rf)47 kΩ
Voltages
Input Voltage (Vin)1.00 V
+Vcc Rails
-Vee Rails
Calculated Gain
5.70x
Av = 1 + (Rf / Rin)
Target Output
5.70 V
Vout = Vin * Av
Real Output (Vout)
5.70 V
🟢 Clean Signal (Linear)
Circuit Schematic & Signal Scaling
Rail Limits Note:
In a standard Operational Amplifier, the output voltage cannot swing all the way to the positive (+Vcc) or negative (-Vee) power rails. Typically, the output saturates (clips) about 1.5 Volts before reaching the supply limits. Modern Rail-to-Rail op-amps can swing within millivolts of the supply, but traditional ones (like the popular LM741 or TL072) follow this clipping limitation.